Datasheet

53
5.16.4 Power-on State
Press 〖Power on State〗softkey and select “Last” option, generator will automatically
recall the last setting that before power off when next power on. For specified conditions,
user can set the power-on state as Last to reduce the repeated operation every time they
turn on the generator. Once select “Default”, the generator will recall the default state at
power-on.
5.16.5 Display/Beep
Press〖Display/Sound〗softkey to enter into the setting menu.
Press〖Screensaver〗key to set the screensaver on or off. If set on, the generator will
enter into the screen protection at 2 minutes.
Press〖Brightness〗key to set the backlight of screen.
Press 〖Key Beep〗 key to enable or disable the beep for key pressing. Even if set the
beep off, once the setting out of range, generator also gives a warning with long blew.
The key pressing beep is only a short prompt tone.
Press〖Display〗key to select display channel. If select single channel display, the graph
displaying area will show current output sketch. If select dual channel, the graph area will
be off and show the dual channel parameters. User also can set the independent
channel parameter, just press the〖CHA/CHB〗to switch the channel.
5.16.6 System Reset
Press〖System Reset〗, generator will return to the system default setting.
5.16.7 Store
Press〖Store〗key to enter into the file manager.