Datasheet

49
Continue to increase the zoom ratio to 900%, the point is overflow the window and
can’t be seen:
Press〖Pan〗option and set Pan to be 200mVdc, the whole waveform move to down
and you will observe the point (250, 550mV) again.
(5) Press 〖 Recover〗 to back for the initial parameters and display the original
waveform.
5.15.8 Store Waveforms
Generator allows user to save the current editing waveform to user-defined waveform,
which is convenient for user to recall and use the editing waveform even exit of the
editing function. It supplies 7 user-defined waveforms (User_arb (*), *=1, 2, 3…). The
following steps show how to save the current editing waveform to user defined
waveform.
(1) Press 〖Advance〗key to enter into setting menu.
(2) Press 〖User〗key and select waveform from 7 user defined waveforms. If selected
waveform is existing, it will be substituted by new one.
(3) Press 〖Return〗and back to advance setting, Press 〖Return〗key again to other
function window.
(4) Use the stored user defined waveform. User defined waveform can be selected from
built-in waveforms, please refer to Insert Built-in Waveform.