Datasheet

42
5.15.3 Select Cursor
User can make more fast and accurate position for one point by using of Cursor.
Cursor setting has four types. Press 〖Cursor All〗and select “Cursor Off” to disable the
cursor. Select “Cursor X” to display one vertical cursor. Select “Cursor Y” to display one
horizontal cursor. Select “Cursor All” to display both of vertical and horizontal lines.
Only selecting X or Y axis, the cursor is valid. User will found cursor will be mainly
operated in following editing work.
5.15.4 Point Edit
Point edit can set voltage to one point on waveform, also can insert or delete one point at
specified location on waveform, which is applicable for locally modification to existing
waveform or create a simple waveform with less points.
The example shows how to locally modify, insert and delete the points to one sine with
100 points:
(1) Insert a sine with 100 points wave as the method introduced in chapter 5.15.2.
(2) Press 〖Point Edit〗key to enter into the editing window.
(3) Press 〖Select Point〗key and set the X-axis to be 10.
(4) Press 〖Point Voltage〗key and set the Y-axis to be 1.0V.