Datasheet

4
2. Quick Start
If it’s the first time for you to use the generator or you have no time to read the
guide carefully, you can get the basic operation as soon as you finish browsing
the chapter1. If more complicated functions are needed or meet difficulties in
operation, please read Features and Functions in chapter 3.
2.1 Prepare the waveform generator for use
2.1.1 Check the list of supplied items
Verify that you have received the complete unit according to the packing list. If
you find package damaged badly, leave it until the instrument passes
performance test. If anything is missing, please contact sales office
2.1.2 Connect the power
Turn on the instrument only the following conditions are met,
Power: AC 100 ~ 240 V
Frequency: 45 ~ 65 Hz
Power consumption: < 30VA
Temperature: 0 ~ 40°C Humidity: <80％
Plug the power cord into an AC100 ~240V socket with ground wire and press On
/Off switch below socket on rear panel. Then blinking power button on front
panel indicating the generator well connected with power but still in off state.
Only press power button, the generator initializes itself and obtains the default
parameters, outputting continuous Sine under normal working state, with
signal’s parameters displayed.
Warning: In order to ensure the security of the operator, use triple- core power
socket with ground wire.