Datasheet

3
* Do not operate the equipment near strong magnetic fields (motors, transformers etc.)
* Keep hot soldering irons or guns away from the equipment.
* Allow the equipment to stabilize at room temperature before taking up measurement
(important for exact measurements).
* Do not input values over the maximum range of each measurement to avoid
damages of the meter.
* Use caution when working with voltages above 35V DC or 25V AC. These Voltages
pose shock hazard.
* Periodically wipe the cabinet with a damp cloth and mid detergent. Do not use
abrasives or solvents.
* The meter is suitable for indoor use only
* Do not operate the meter before the cabinet has been closed and screwed safely as
terminal can carry voltage.
* Do not store the meter in a place of explosive, inflammable substances.
* Do not modify the equipment in any way
* Do not place the equipment face-down on any table or work bench to prevent
damaging the controls at the front.
* Opening the equipment and service – and repair work must only be performed by
qualified service personnel
* -Measuring instruments don’t belong to children hands-
Cleaning the cabinet
Prior to cleaning the cabinet, withdraw the mains plug from the power outlet.
Clean only with a damp, soft cloth and a commercially available mild household cleanser.
Ensure that no water gets inside the equipment to prevent possible shorts and damage
to the equipment.