Datasheet

Press 〖Return〗key to back to parameter setting and press the 〖Depth〗softkey and then

set the value to 80% using the numeric keypad or the knob and arrow keys. Press 〖％〗

softkey finish entering the number if you are using the numeric keypad.

4. To set modulating waveform frequency

Press 〖AM Freq〗softkey and then set the value to 10 using the numeric keypad and

finally press〖Hz〗softkey.

5. To select the modulation waveform shape

Press the 〖Shape〗softkey then press 【Ramp】key to set the shape of modulating

waveform as Ramp.

6. To set AM parameters by knob or arrow keys

4.3.8 To output an Sum waveform

If you want to output a Sum waveform with amplitude 10% and modulation waveform is

Ramp.

1. Select Sum

Press 【Modulate】key and then select 〖Sum〗softkey by pressing the 〖Mod Type〗

softkey.

2. To set the Sum amplitude

Press the 〖Sum Ampl〗softkey and then set the value to 10 using the numeric keypad

and finally press〖%〗softkey, or set by the knob and arrow keys.

3. To select the modulation waveform shape

Press the 〖Shape〗 softkey then press 【Ramp】 key to set the shape of modulating

waveform as Ramp.

4. Generator output a sum waveform as preset modulating parameters and you also

can adjust amplitude of summed ramp by 【＜】or 【＞】keys.