User Manual

6.2 Battery replacement
Before replacing the battery,
disconnect test probes from
any circuit under test, turn the
meter off and remove test
probes from the input terminals.
Use the following procedure:
When the battery voltage drop below proper
operation range the
symbol will appear on
the LCD display and the battery need to be
replaced.
Press the battery cover and towards arrowhead
direction to open the battery cover. Replace the
battery with two ne
w 1.5V batteries (AG13).
Replace the battery cover.
-30-
Before replacing the battery,
disconnect test probes from
any circuit under test, turn the
meter off and remove test
probes from the input terminals.
When the battery voltage drop below proper
symbol will appear on
the LCD display and the battery need to be
Press the battery cover and towards arrowhead
direction to open the battery cover. Replace the
w 1.5V batteries (AG13).