User Manual

Press FUNC. Key and select the function at
mode.
Connect the + pin to the anode, the - pin to the
cathode of the diode under testing.
The meter will show the approx. forward voltage
of the diode. If the lead connection is reversed,
only figure "OL" displayed.
4.5 Continuity check
Press FUNC. Key and select the function at
mode connect the test clip to the
resistance. If continuity exists (i.e., resistance
less than 30) built – in buzzer will sound.
5. AUTO POWER OFF (APO)
To extend the battery life, Auto Power Off
function is provided. If no key operations of
range changing happen about 10 minutes, the
meter will be turned off automatically.
When APO happens, the state of the meter is
saved.
6. MAINTENANCE
6.1 General Maintenance
Periodically wipe the case with a damp cloth and
mild detergent. Do not use abrasives or solvents.
-29-