User Manual

NOTE:
When this mode the RANGE key is available,
when the input is not connected, i.e. at open
circuit, the figure "OL" will be displayed for the
overrange condition.
4.3 Capacitance measurement
To avoid electrical
damages to the meter
test,
disconnect circuit power
and discharge all high
capacitors before measuring
capacitance. Keep two pins of
the capacitance in short before
measuring.
Press FUNC. Key and select the function at
mode.
Connect the test clip to the capacitor being
measured and read the displayed value.
NOTE:
When this mode the RANGE key is available.
discharge the capacitor before measuring.
4.4 Diode measurement
To avoid electrical shock
damages to the meter
test,
disconnect circuit power
and discharge all high
capacitors before testing
diodes.
-28-
When this mode the RANGE key is available,
when the input is not connected, i.e. at open
circuit, the figure "OL" will be displayed for the
4.3 Capacitance measurement
To avoid electrical
shock or
damages to the meter
under
disconnect circuit power
and discharge all high
-voltage
capacitors before measuring
capacitance. Keep two pins of
the capacitance in short before
Press FUNC. Key and select the function at
Connect the test clip to the capacitor being
measured and read the displayed value.
When this mode the RANGE key is available.
discharge the capacitor before measuring.
To avoid electrical shock
or
damages to the meter
under
disconnect circuit power
and discharge all high
-voltage
capacitors before testing