User Manual

Caution when working with
voltages above 50V DC or
36V AC rms.
4. OPERATING INSTRUCTION
4.1 Auto scan measurement mode
Pressing this key longer than 1 second, the
meter will turn on and enter auto scan
mode.now,you
can measurement: ohm, diode,
capatitance and continuity check.
NOTE:
The range when auto scan mod:
Ohm: 600.0~6.000M;
Cap: 6nF~600µF.
4.2
Resistance measurement
To avoid electrical shock or
damages to the meter
test,
disconnect circuit power
and discharge all high
capacitors before measuring
resistance.
Press FUNC. Key and select the function at
- mode.
Connect the test clip to the object
being measured and the measured value
show on the display.
-27-
Caution when working with
voltages above 50V DC or
4. OPERATING INSTRUCTION
4.1 Auto scan measurement mode
Pressing this key longer than 1 second, the
meter will turn on and enter auto scan
can measurement: ohm, diode,
capatitance and continuity check.
The range when auto scan mod:
Resistance measurement
To avoid electrical shock or
damages to the meter
under
disconnect circuit power
and discharge all high
-voltage
capacitors before measuring
Press FUNC. Key and select the function at
Connect the test clip to the object
being measured and the measured value
will