User Manual

Warning!
Don´t expose the humidity sensor to direct sunlight.
Don´t touch or manipulate the humidity sensor.
6.14. Measuring Temperature
1. Set the function switch to “1°C or 0,1°C” position.
2. Connect the black plug of temperature probe the COM-jack and red plug
to the “V/ ” jack”.
3. Touch the end of the temperature sensor to the area or surface of the
object to be measured. The display will show the temperature reading
value (°C) directly.
Warning!
When function switch on temperature range, never attempt a voltage
measurement.
6.15. Non-Contact AC voltage test (NCV):
* Set the function switch to the ON position
* Remove the meter and face the NCV detector to ACV source.
* If source voltage in 50-600V the NCV indicate lamp will light.
-50-