Datasheet

-50-
4.11. DC Current Measurements
- Insert the black test lead banana plug into the
negative COM jack.
- For current measurements up to 6000μA DC, set
the function switch to the μA position and insert the
red test lead banana plug into the μA/mA jack.
- For current measurements up to 600mA DC, set
the function switch to the mA position and insert the
red test lead banana plug into the μA/mA jack.
- For current measurements up to 10A DC, set the
function switch to the 10A position and insert the
red test lead banana plug into the 10A jack.
- Press the MODE button to indicate “ ” on the
display.
- Read the current in the display.
4.12. AC Current Measurements
CAUTION: Do not make 10A current measurements for
longer than 30 seconds. Exceeding 30 seconds may cause
damage to the meter and/or the test leads.
- Insert the black test lead banana plug into the
negative COM jack.
- For current measurements up to 6000μA AC, set
the function switch to the μA position and insert the
red test lead banana plug into the μA/mA jack.
- For current measurements up to 600mA AC, set the
function switch to the mA position and insert the red
test lead banana plug into the μA/mA jack.
- For current measurements up to 10A AC, set the
function switch to the 10A position and insert the red
test lead banana plug into the 10A jack.
- Press the MODE button to indicate “ ” on the
display.
- Read the current in the display