Datasheet

-45-
4. DMM Measurement and Setup
4.1 DC Voltage Measurements
CAUTION: Do not measure DC voltages if a motor in the circuit
is being switched ON or OFF. Large voltage surges may
occur that can damage the meter.
- Set the function switch to the VDC position.
- Insert the black test lead banana plug into the negative
COM jack.
- Insert the red test lead banana plug into the positive
V jack.
- Read the voltage in the display.
4.2 AC+DC Voltage Measurements
CAUTION: Do not measure DC voltages if a motor on the
circuit is being switched ON or OFF. Large voltage surges
may occur that can damage the meter.
- Set the function switch to the VDC position.
- Insert the black test lead banana plug into the
negative COM jack.
- Insert the red test lead banana plug into the
positive V jack.
- Press the MODE key to switch the V AC+DC
Voltage functions.
- Read the AC+DC voltage in the display.