User Manual

Warning!
To avoid electric shock, disconnect both test leads from equipment
before you remove or install the battery.
Follow these steps to install the battery:
1. Turn off the power and disconnect the two test leads.
2. Remove the 2 screw to open the battery cover.
3. Remove the battery.
4. Place the battery into the insulation capsule.
5. Replace the battery cover and secure it with the screws.
WARNING! Do not operate the meter until you replace the battery
and close the battery compartment cover.
Notes:
Never leave a weak or dead battery in your meter. Even a leakproof
battery can leak damaging chemicals. When you are not going to use
your meter for a week or more, remove the battery.
Batteries, which are used up dispose duly. Used up batteries are
hazardous and must be given in the for this being supposed
collective container.
Statutory Notification about the Battery Regulations
The delivery of many devices includes batteries, which for example
serve to operate the remote control. There also could be batteries or
accumulators built into the device itself. In connection with the sale of
these batteries or accumulators, we are obliged under the Battery
Regulations to notify our customers of the following:
-52-