User Manual

1. LCD-Display
2. “SELECT”-button
3. Range-button for range selection
4. REL button
5. Hz/Duty-button
6. MIN/MAX-Hold
7. HOLD/LIGHT-button
8. Function switch
9. V//Hz/Diode-terminal
10. COM - terminal
11. µA/mA - terminal
12. 10 A – terminal
4.1 Description
1. LCD Display
Digital readings are displayed on a 6000 count display with automatic
polarity indication and decimal point placement.
2. SELECT-button
To select between DC and AC, °C and °F,  and
°
)))
3. Range-button
For manual selection of measuring range.
4. REL-button
Example:
If the stored Relative value is 20.00 V and the present measured
value is 22.00 V, the display shows a value of 2.00 V.
If the value is the same as the stored Relative value, the display
shows 0.00 V.
* Press the „REL“ button to activate the REL-mode.
* Auto range selection will be deactivated and the present
range will be stored.
* Press „REL“ again to show the stored value..
* Press and hold the „REL“-button for 1 second or turn the
rotary switch to remove the stored value and to leave the
„REL“-mode.
-40-