User Manual

* Fetch out the battery when the meter will not be used for
long period.
* Periodically wipe the cabinet with a damp cloth and mid
detergent. Do not use abrasives or solvents.
* The meter is suitable for indoor use only
* Do not operate the meter before the cabinet has been
closed and screwed safely as terminal can carry voltage.
* Do not store the meter in a place of explosive, inflammable
substances.
* Measuring instruments don’t belong to children hands.
Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available
mild household cleanser. Ensure that no water gets inside the
equipment to prevent possible shorts and damage to the
equipment.
CAUTION!
Note on using the supplied safety test leads according the
IEC / EN 61010-031:2008:
Measurements in the field of overvoltage category CAT I or CAT
II can be performed with test leads without sleeves with a
maximum of up to 18mm long, touchable metallic probe,
whereas for measurements in the field of overvoltage category
CAT III or CAT IV test leads with put on sleeves, printed with
CAT III and CAT IV must be used, and therefore the touchable
and conductive part of the probes have only max. 4mm of
length.
-26-