User Manual

2. Introduction
The multimeter is heavy-duty and rugged hand-held multimeter that
will give you confidence and peace of mind in your every measuring
job.
Please read these operating instructions very carefully before
commencing your measurements.
- Data Hold Function - freezes the display so you can keep the
measured value there even after you disconnect the probes.
- Min/Max-function
- Auto polarity operation
- Relative measurement
- Overload and Transient protection
- RS-232 C or USB interface for communication to the PC
- Backlight
- Low Battery indicator
appears when you need to replace the batteries.
- Beeper
sounds for overload warning, continuity function and range
selection.
- Auto power off (able to switch off)
-35-