User Manual

5.1. Battery Installation or replacement
The meter is powered by two 1.5 V Alkaline batteries.
Refer to Fig. 4 and use the following procedure to replace
the battery.
1. Disconnect the test leads and turn the meter off. Remove the
test leads from the front terminals.
2. Remove the battery cover of case bottom from the instrument
by removing the screw and then lifting off battery cover.
3. Lift the battery from the battery box.
4. Reinsert the battery into the battery box.
5. Replace the battery cover and reinstall the screw.
Statutory Notification about the Battery Regulations
The delivery of many devices includes batteries, which for example
serve to operate the remote control. There also could be batteries
or accumulators built into the device itself. In connection with the
sale of these batteries or accumulators, we are obliged under the
Battery Regulations to notify our customers of the following:
Please dispose of old batteries at a council collection point or return
them to a local shop at no cost. The disposal in domestic refuse is
strictly forbidden according to the Battery Regulations. You can
return used batteries obtained from us at no charge at the address
on the last side in this manual or by posting with sufficient stamps.
Batteries, which contain harmful substances, are
marked with the symbol of a crossed-out waste bin,
similar to the illustration shown left. Under the
waste bin symbol is the chemical symbol for the
harmful substance, e.g. „Cd“ for cadmium, „Pb“
stands for lead and „Hg“ for mercury.
-31-