User Manual

10. Transformer Jaws
Designed to pick up the AC/DC current flowing through the
conductor.
4. Operation
4.1. Precautions and Preparations for measurement
* If the meter is used near equipment that generates electro-
magnetic interference, the display may be unstable or indicate
incorrect measurement values
* Make sure the battery is properly connected.
* The instrument should only be operated between 0° C...50° C
and at less than 80 % R.H. except current function is operated
between 0° C...40° C.
* Do not use or store the instrument in a high temperature or high
humidity environment and do not store the unit in direct sunlight.
* Do not replace battery with power on condition.
* If the unit is not to be used for a long period of time, remove the
battery.
* Do not forget to turn off after use.
* Maximum rated voltage to earth for voltage measurement
terminals is 600 V CAT. II, 300 V CAT. III.
* This instrument must not be used on uninsulated conductors at
a voltage greater than 600 V AC/DC.
-28-