User Manual

4. Data-Memory function
The last measured value before releasing the MEAS-key will be
saved to data-memory automatically. You can recall this value by
pressing the MEM-Key. The last measured value can be displayed
as MAX (highest measured value), MIN (lowest measured value)
and LAST (latest displayed value). Proceed as follows:
* To recall the last measured value press the MEM-Key and the
MAX (highest measured) value will be displayed
* Press the MEM-key again to display the MIN (lowest
measured) value
* Pressing the MEM-key again will display the LAST (latest
displayed) value
* If the device is powered- off, press the MEM-Key to switch on
the device and show the latest measurement
Note:
If you switch on the device by pressing the MEAS-key the
stored measurement value will be overwritten immediately
-16-