User Manual

* Do not place the equipment face-down on any table or work
bench to prevent damaging the controls at the front.
* Opening the equipment and service – and repair work must
only be performed by qualified service personnel
* Measuring instruments don’t belong to children hands.
1.1. Laser classification
This device emits a visible laser beam
of the Laser class 2 in accordance with
EN 60825 Part 1, which emerges at the
top of the unit. Use this device only in
accordance with the relevant national
standards.
* The device should only be handled with extreme caution, and
avoid physical contact with the laser. (Laser emission)
* Never point the laser at people or animals and never look
directly into the laser beam, since it can cause serious eye
damage.
* Avoid the use of lasers at eye level and possible reflections off
reflective surfaces such as glass and polished metal.
* Never aim the laser to gaseous substances or gas reservoirs.
(Explosion hazard)
* Any use must be performed by qualified personnel only in
compliance with the relevant national regulations.
Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available
mild household cleaner. Ensure that no water gets inside the
equipment to prevent possible shorts and damage to the
equipment.
-13-