Datasheet

ManualsBrandsPeakTech ManualsElectrical & Electronic Test InstrumentsDigital RCD Tester, CAT III 600 V

17.9.2019 PeakTech® 2710 - PeakTech® - Convincing Top Technology
https://www.peaktech.de/productdetail/kategorie/fi-tester-und-schleifenimpedanz-messgeraete/produkt/peaktech-2710.html 1/2
BACK
PeakTech 2710_04-2019.pdf (823.1 kB)
MANUAL
2710_back.jpg (205.5 kB)
2710_Case.jpg (780.9 kB)
2710_front.jpg (254.9 kB)
2710_Left.jpg (392.0 kB)
2710_packing.jpg (513.1 kB)
2710_right.jpg (314.4 kB)
2710_Use.jpg (809.6 kB)
PICTURES
PeakTech
Prüf- und Messtechnik GmbH
Gerstenstieg 4
DE 22926 Ahrensburg
Phone: 0049 4102 42343/44
Fax: 0049 4102 43416
Products   RCD- and Loop- Testers   PeakTech® 2710
PeakTech
®
 2710 PROD-ID: P 2710
Digital RCD Tester
Residual  current  circuit  breakers  are  used  for  personal  protection  and
switch  off  a  circuit  when  a  fault  current  is  detected,  which  flows
through  the  protective  earthing  (PE).  This  RCD  tester  determines  the
tripping  current  and  the  tripping  time  of  residual  current  circuit
breakers  which  are  used  in  every  new  building  according  to  current
building regulations.
The  various selectable  test  currents  and  characteristics  of  the  FI  allow
flexible use of this instrument.
FI  testers  allow  a  fault  current  to  flow  and  determine  at  which  fault
current the FI reacts. Furthermore, the trip time is measured. These two
parameters  tripping  current  and  tripping  time  are  the  safety-relevant
characteristics of a residual-current-operated switch.
3-digit LCD display with backlight
Normal (N) or Selective (S) -type RCD test
Applicable measurement standards: IEC 61557-6, NF EN 61557-6, VDE
0413-6
Safety: EN-61010-1; CAT III 600 V, IP40, double insulated housing
Accessories: Carrying case, Test leads, Batteries and User manual
Available: August 2019

Summary of content (2 pages)

PAGE 1
7.9.2019 PeakTech® 2710 - PeakTech® - Convincing Top Technology PeakTech Prüf- und Messtechnik GmbH Gerstenstieg 4 DE 22926 Ahrensburg Phone: 0049 4102 42343/44 Fax: 0049 4102 43416 Products RCD- and Loop- Testers PeakTech® 2710 PeakTech® 2710 PROD-ID: P 2710 BACK Digital RCD Tester Residual current circuit breakers are used for personal protection and switch off a circuit when a fault current is detected, which flows through the protective earthing (PE).
PAGE 2
17.9.2019 PeakTech® 2710 - PeakTech® - Convincing Top Technology Nominal test current 10/30/100/500/1000mA Current selection 0.5 x, 1x, 2x, 5 x nominal current Trip time 10-2000 ms at 0.5 x 10-500 ms at 1x 10-150 ms at 2x 10-40 ms at 5x Ramp test 0.4 x to 1.4 times nominal rated current Operation voltage 6 x 1,5 V AA (UM-3) batteries Dimensions (WxHxD) 92 x 200 x 50 mm Weight 700 g EAN-13 4250569404672 https://www.peaktech.