User Manual

If the system you are trying to test is not voltage free, the beep

will sound. The following warning screen will appear. Remove

your leads immediately.

If the system is not live, the test will start and the following screen

will appear, indicating the test duration and other factors.

If either the operator or the instrument stops the test, the latest

result will remain on the L.C.D. The instrument switches off after

45 to 60 sec.

11. Battery replacement

* The digital insulation tester´s battery is situated under the

tester.

* The ENER-SAFE

display will indicate when the batteries

need to be replaced.

* Disconnect the test leads from the instrument, remove the

battery cover and the batteries.

* Replace with eight Alkaline 1,5 V R6 or L6 batteries, taking

care to observe correct polarity

-36-

LIVE WARNING ...

Circuit Live !!!

R = 125340 M 85,2s

0 IIIIIIIIII 10.000

R = 125340 M 85,2s

0 HOLD 10.000