User Manual

This is indicated by a one-second long beep accompanied by the
"HOLD" message on the display.
DO NOT REMOVE LEADS UNTIL THE HOLD MESSAGE
APPEARS ON THE DISPLAY.
7.15. "Replace Battery" warning indicator
If the battery energy is detected to be too low, the instrument will
display the "Replace Battery" warning and automatically
shutdown. The instrument cannot operate properly with a low
battery. Use only Alkaline batteries.
7.16. Auto-Off
The Auto-off is annunciated by a one-second beep. The Auto-off
timer is automatically enabled.
* ENERSAVE-Funktion zur Verlängerung der Batterie-
lebensdauer.
* Balkengrafik zur Anzeige der Testspannung (Anstieg und
Abfall) der Batterielebensdauer während der Messung.
-32-
LIVE WARNING MESSAGE / BEEPER
To clear Live Warning Message / Beeper remove leads from circuit
under test and push "TEST" button until display clears.