Manualshelf

User Manual

ManualsBrandsPeakTech ManualsIsolation TransformersIsolating Transformer 230 VAC 230 VAC
12345678910
1. Safety Precautions
This product complies with the requirements of the following European
Community Directives: 2004/108/EC (Electromagnetic Compatibility) and
2006/95/EC (Low Voltage) as amended by 2004/22/EC (CE-Marking).
To ensure safe operation of the equipment and eliminate the danger of serious
injury due to short-circuits (arcing), the following safety precautions must be
observed.
Damages resulting from failure to observe these safety precautions are exempt
from any legal claims whatever.
* Do not use this instrument for high-energy industrial installation
measurement.
* Before connecting this device to the grid, make sure the nominal rating of the
device matches the grid-voltage.
* Only connect this device to a power outlet with protective earth.
* Do not cover the ventilation holes.
* Do not insert metal objects through the ventilation holes.
* Do not place the equipment on damp or wet surfaces.
* Replace a defective fuse only with a fuse of the original rating. Never short-
circuit fuse or fuse holding.
* To avoid electric shock, do not operate this product in wet or damp
conditions. Conduct measuring works only in dry clothing and rubber shoes, i.
e. on isolating mats.
* Comply with the warning labels and other info on the equipment.
* The device is not to be to operated unattended.
* Do not subject the equipment to direct sunlight or extreme temperatures,
humidity or dampness.
* Do not subject the equipment to shocks or strong vibrations.
* Do not operate the equipment near strong magnetic fields (motors,
transformers etc.).
* Keep hot soldering irons or guns away from the equipment.
* Allow the equipment to stabilize at room temperature.
* Use caution when working with voltages above 35V DC or 25V AC. These
Voltages pose shock hazard.
* Periodically wipe the cabinet with a damp cloth and mid detergent. Do not
use abrasives or solvents.
* The device is suitable for indoor use only.
* Do not operate the device before the cabinet has been closed and screwed
safely as terminal can carry voltage.
-8-