User Manual

Note:
- In order to obtain an accurate reading, a capacitor must be
discharged before measurement begins.
The chip has a built-in discharge mode to automatically
discharge the capacitor. In discharge mode, the LCD display
“DS.C”.
- For very large values of capacitance measurement time can
be several minutes before the final reading stabilizes. The
LCD displays "dis.c" when discharging. Discharging through
the chip is quite slow. We recommend to discharge the
capacitor with some other equipment.
NOTE
In lower range substract residual offset reading from the result
with test leads opening.
WARNING !
Never apply an external voltage to socket damage to the meter
may result.
-33-