User Manual

 To exit the Manual Ranging mode and return to Autoranging,
press and hold the RANGE key for 2 seconds.
5.4. MAX/MIN
Note:
Select the desired range BEFORE entering MAX/MIN mode.
When using the MAX/MIN function in Autoranging mode, the
meter will "lock" into the range that is displayed on the LCD
when MAX/MIN is activated. If a MAX/MIN reading exceeds that
range, an "OL" will be displayed.
 Press the MAX/MIN key to activate the MAX/MIN recording
mode.
 The display icon "MAX" will appear.
 The meter will display and hold the maximum reading and
will update only when a new "max" occurs.
 Press the MAX/MIN key again and the display icon "MIN"
will appear.
 The meter will display and hold the minimum reading and
will update only when a new "min" occurs.
 To exit MAX/MIN mode press and hold the MAX/MIN key for
2 seconds.
5.5. Display Backlight
The “BACKLIGHT”-button is used to turn the backlight on. Push
the button again, the back light will shut off.
5.6. DATA-HOLD
The hold function freezes the reading in the display.
Press the HOLD key to activate or to exit the HOLD function.
-31-