User Manual

1. Mini USB interface
Connect with PC, easily for data transmission and
management.
2. LCD
Used for displaying the measuring results and various
symbols.
3. ON/OFF- key
Used for turn on or off the meter.
4. FUNC. key
When FUNC. key is pressed, the main test mode could be
selected sequentially: Auto-LCR mode→Auto-L mode→Auto-C
mode→Auto-R mode→DCR mode→ Auto-LCR mode.
5. CAL key
Used to do OPEN/SHORT calibration.
6. SORTING key
Press this key to enter into sorting mode, which could help the
user to make a quick sort for a bunch of components.
7. PCLINK key
Press this key to communicate with PC.
8. HOLD key
Used to maintain the measurement data unchanging, by
pressing the key again it will resume the measurement.
9. D/Q/ESR key
In L/C measurement mode, press the key to select parameters
of D/Q/θ/ESR.
10. SETUP key
When sorting mode is active, press SETUP key to modify the
reference value, range and the tolerance settings sequentially.
-49-