User Manual

8. HOLD/LIGHT-button

The Data-Hold-Function enables to "freeze" a measured value for

later reading in the LCD. For activating the Data-Hold-Function, press

the HOLD-button. „H“-Symbol appears in the LCD. To leave the Hold-

Function, press the Hold button again or move the Function switch. To

turn on/off the backlight press the HOLD-button for 2 sec.

9. Range-button

For manual selection of measuring range.

10. REL-button

Example:

If the stored Relative value is 20.00 V and the present measured value

is 22.00 V, the display shows a value of 2.00 V.

If the value is the same as the stored Relative value, the display

shows 0.00 V.

 Press the „REL“ button to activate the REL-mode.

 Auto range selection will be deactivated and the present

range will be stored.

 Press the „REL“-button or turn the rotary switch to remove the

stored value and to leave the „REL“-mode.

11. V/Ω/Hz/

Return terminal for all measurements

12. COM-Terminal

Return terminal for all measurements

-38-