User Manual

1.1. Safety Symbols
The following symbols are imprinted on the front panel of the meter
to remind you of measurement limitations and safety.
10 A
The maximum current, that you can measure a this
terminal is 10 A DC/AC. This terminal is fuse protected by
F 10A/600 V fuse. When using this range with high
current, keep the duty cycle to 2 min. on load and 15 min.
off load.
mA
The max. current, that you can measure with this terminal
is 600 mA, that is fuse protected by 0,6A/250 V fuse.
MAX 600V
DC/AC
To avoid electrical shock or instrument damage, do not
connect the common Input COM terminal to any source of
600 V DC/ 600 V AC with respect to earth ground.
max. input values:
600V DC orAC
NOTE:
Refer to the complete operation instructions.
Indicates protection class II, double insulation
CAT III
600V
Device with overvoltage protection category III 600V
-30-