User Manual

Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available mild
household cleanser. Ensure that no water gets inside the equipment to
prevent possible shorts and damage to the equipment.
1.1. Safety Symbols
The following symbols have been replaced on the meter to
remind you of measurement limitations and safety:
10 A
Fused input for current measurements in the 10A
range up to max. 10A AC / DC. In 10A range
measurement process to max. 30 sec limit, make
the next measurement after 15 minutes. The
entrance is protected by a fuse of 10A/600V.
mA
Input for current measurements up to max. 400mA
AC / DC. The entrance is a fuse 0.5A/600V
protected.
MAX 600V
DC/AC
max. allowed voltage difference of 600V DC or AC
from between COM input and earth. Do never
exceed these values for safety reasons.
CAT III
600 V
Device with overvoltage protection category III
600V
max. input values:
600V DC orAC
NOTE:
Refer to the complete operation instructions.
Indicates protection class II, double insulation
-28-