User Manual

6.4. Setting of Operation Models
6.4.1. Enable / Disable Output
Action LCD-Display Description
1. Press Output ENABLE
2. Press Output DISABLE
6.4.2. Lock/Unlock the Keypad and Jog Dial
Action
LC
D
-
Display
Description
1. Press Keypad and Jog Dial Locked
2. Press Keypad and Jog Dial Unlocked
6.4.3. PC Interface RS-232/RS-485 Selection
Action LCD-Display Description
1. Press
then
---232
485
This will enter into PC interface RS-232/ RS-485
selection
2. Press Press this key to confirm
3. Press Press this key to confirm
Note: Whenever to terminate the settings of operation mode, press "CLEAR" to return to
normal operation
6.4.4. Upper voltage limit setting
Action LCD-Display Description
1. Press
then
OVER V
25,6
This will enter into upper voltage limit adjustment.
In this example, 25,6 V is the present upper voltage
limit
2. to Use this number key to input your desired voltage
3. Press Press this key to confirm
Note: Whenever to terminate the upper voltage limit settings, press "CLEAR" to return to
normal operation
6.4.5. Output Enable / Disable at Power Up
Action LCD-Display Description
1. Press
then  UP
PrUP
ON
This will enable the output at power up. i. e. when
you switch on the power supply, the output is also
ON automatically with last set voltage value
2. Then
then  DN
PrUp
OFF
This will disable the output at power up. i. e. the
output will be OFF at next power up. This is the
default setting for safety reason !!
-35-
SHIFT
LOCK/UNLOCK
SHIFT
RS-232/485
RS-232/485
ENTER
SHIFT
0
ENTER
9
0
O/P ON/OFF
SHIFT
SHIFT
SHIFT