User Manual

-22-
3.6 More functions
There are more functions, which are also included such as the Max
/ Min button, the Data HOLD button, the automatic switch-off, the
backlight and the flashlight.
To determine the maximum and minimum values of a
measurement, simply press the Max / Min key.
With the Data HOLD key it is possible to freeze the current value.
The automatic shutdown takes about 15 minutes and switches off
the device. This only happens if the device has been switched on
for 15 minutes and the switch position has not been changed.
One of the useful features of the fork current meter are the
illuminated buttons and the illuminated display. This can be
switched on and off by pressing and holding the MODE button.
To turn on the flashlight, the fork current meter must be turned on.
By pressing the HOLD button for a longer time the flashlight will be
switched on or off.