Datasheet

9
LED of the measurement spotlight
10
LED light to indicate for the Non-Contact-Voltage Detector
11
ZERO-button
To activate the zero adjustment the display for the measurement functions of DC current
and capacity.
Measurement spotlight
Press and hold ZERO button for 2 seconds to activate the measuring point illumination
for a better view of the point to be measured in low light conditions ZERO button for 2
seconds.
12
Function switch
To select the desired measurement function.
13
MAX/MIN-button
Press the MAX/MIN button to activate the MAX/MIN recording mode. The display icon
"MAX" will appear. The meter will begins recording and displaying the maximum value
measured.
Press the MAX/MIN button and “MIN” will appear. The meter will display the minimum
value measured during the recording session.
Press the MAX/MIN button and “MAX MIN” will appear. The meter will display the
present reading, but will continue to update and store the max and min readings.
To exit MAX/MIN mode press and hold the MAX/MIN button for 2 seconds.
14
RANGE-button
In the Voltage, Resistance, Capacitance or Frequency the meter automatically selects
the best range for the measurements being made. For measurement situations requiring
that a range be manually selected, perform the following:
1. Press the RANGE button. The “AUTO” display icon will turn off.
2. Press the RANGE key to step through the available ranges. Observe the
decimal point and units displayed until the preferred range is located.
3. To exit the Manual Ranging mode and return to Autoranging, press and hold
the RANGE key for 2 seconds.
15
Battery compartment (rear side)
16
T2 thermocouple input (Type-K)
For measurements of temperature with a thermocouple
17
Socket Lock
Safety measure on the use of temperature inputs type K or the inputs V//CAP and
COM
18
V//CAP-input socket
-30-