User Manual

Command code & return
value
Function
Example
Input Command:
GETD[CR]
Return value:
<voltage><current><status>[
CR]
OK[CR]
Get PS Display values of Voltage,
Current and
Status of CC/CV
<voltage>=????
<current>=????
<status>=0/1 (0=CV, 1=CC)
Input command:
GETD[CR]
Return value:
150016001[CR]
OK[CR]
Meaning:
The PS Display value is 15V
and 16A.
It is in CC mode.
Input Command:
GOVP[CR]
Return value:
<voltage>[CR]
OK[CR]
Get preset upper limit of
output Voltage
<voltage>=???
Input command:
GOVP[CR]
Return value:
111[CR]
OK[CR]
Meaning:
The preset upper limit of output
Voltage is 11.1V
Input Command:
SOVP<voltage>[CR]
Return value:
OK[CR]
Preset upper limit of output
Voltage
<voltage>=000<???<Max
-Volt
*Max
-Volt value refer to
product specification
Input command:
SOVP151[CR]
Return value:
OK[CR]
Meaning:
Preset upper limit of output
Voltage as 15.1V
Input Command:
GOCP[CR]
Return value:
<current>[CR]
OK[CR]
Get preset upper limit of
output Current
<current>=???
Input command:
GOCP[CR]
Return value:
111[CR]
OK[CR]
Meaning:
The preset upper limit of output
Current is 11.1A
Input Command:
SOCP<current>[CR]
Return value:
OK[CR]
Preset upper limit of
output Current
<current>=000<???<Max
-Curr
*Max
-Curr value refer to
product specification
Input command:
SOCP151[CR]
Return value:
OK[CR]
Meaning:
Preset upper limit of output
Current as 15.1A
-
2
7
-