Datasheet

8
Control Area
6
1
2
3
5
4
Figure 1-3 Control Area Overview
1. Function button area: Total 6 buttons.
2. Horizontal control area with 1 button and 2 knobs.
"HOR" button refer to horizontal system setting menu, "Horizontal Position" knob control
trigger position, " Horizontal Scale" control time base.
3. Trigger control area with 2 buttons and 1 knob.
The Trigger Level knob is to adjust trigger voltage. Other 2 buttons refer to trigger system
setting.
4. Copy button: This button is the shortcut for Save function in the Utility function menu.
Pressing this button is equal to the Save option in the Save menu. The waveform, configure or
the display screen could be saved according to the chosen type in the Save menu.
5. Vertical control area with 3 buttons and 4 knobs.
"CH1" and "CH2 " correspond to setting menu in CH1 and CH2, "Math" button refer to math
menu, the math menu consists of six kinds of operations, including CH1-CH2, CH2-CH1,
CH1+CH2, CH1*CH2, CH1/CH2 and FFT. Two "Vertical Position" knob control the vertical
position of CH1/CH2, and two "Scale" knob control voltage scale of CH1, CH2.
6. M knob(Multipurpose knob): when a symbol appears in the menu, it indicates you can
turn the M knob to select the menu or set the value. You can push it to close the menu on the
left and right.