Datasheet

61
2. Disconnect power before cleaning your Oscilloscope. Clean the instrument with a wet soft
cloth not dripping water. It is recommended to scrub with soft detergent or fresh water. To
avoid damage to the instrument or probe, do not use any corrosive chemical cleaning
agent.
Warning: Before power on again for operation, it is required to confirm that the
instrument has already been dried completely, avoiding any electrical short
circuit or bodily injury resulting form the moisture.
All rights, also for translation, reprinting and copy of this manual or parts are reserved.
Reproduction of all kinds (photocopy, microfilm or other) only by written permission of the publisher.
This manual considers the latest technical knowing. Technical changings which are in the interest
of progress reserved.
We herewith confirm, that the units are calibrated by the factory according to the specifications as
per the technical specifications.
We recommend to calibrate the unit again, after one year.
© PeakTech
®
06/2018/Ehr.
PeakTech Prüf- und Messtechnik GmbH – Gerstenstieg 4 - DE-22926 Ahrensburg / Germany
[phone]/44 [phone]
 [e-mail]  www.peaktech.de