Datasheet

1. Quick Start

Introduction to the Structure of the Oscilloscope

This chapter makes a simple description of the operation and function of the front panel of the

oscilloscope, enabling you to be familiar with the use of the oscilloscope in the shortest time.

Front Panel

The front panel has knobs and function buttons. The 5 buttons in the column on the right side of the

display screen are menu selection buttons, through which, you can set the different options for the

current menu. The other buttons are function buttons, through which, you can enter different

function menus or obtain a specific function application directly.

5 46

1 2

Figure 1-1 Front panel

1. Display area

2. Menu selection buttons: Select the right menu item.

3. Control (button and knob) area

4. Probe Compensation: Measurement signal (5V/1kHz) output.

5. Signal Input Channel

6. USB Host port: It is used to transfer data when external USB equipment connects to the

oscilloscope regarded as "host device". For example: Saving the waveform to USB flash disk

needs to use this port.

7. Power on/off