Datasheet

38
To update your instrument firmware, do the following:
1. Push the Utility button, select Function in the right menu, select Configure in the left menu,
select About in the right menu. View the model and the currently installed firmware version.
2. From a PC, visit www.peaktech.de and check if the website offers a newer firmware version.
Download the firmware file. The file name must be Scope.update. Copy the firmware file onto
the root directory of your USB memory device.
3. Insert the USB memory device into the front-panel USB port on your instrument.
4. Push the Utility button, select Function in the right menu, select Update in the left menu.
5. In the right menu, select Start, the messages below will be shown.
6. In the right menu, select Start again, the interfaces below will be displayed in sequence. The
update process will take up to three minutes. After completion, the instrument will be shut down
automatically.
7. Press the button to power on the instrument.
How to Measure Automatically
Push the Measure button to display the menu for the settings of the Automatic Measurements.
At most 8 types of measurements could be displayed on the bottom left of the screen.
The oscilloscopes provide 30 parameters for auto measurement, including Period, Frequency,
Mean, PK-PK, RMS, Max, Min, Top, Base, Amplitude, Overshoot, Preshoot, Rise Time, Fall
Time, +PulseWidth, -PulseWidth, +Duty Cycle, -Duty Cycle, Delay A→B , Delay A→B
,
Cycle