Datasheet

31
How to Save and Recall a Waveform
Push the Utility button, select Function in the right menu, select Save in the left menu. By
selecting Type in the right menu, you can save the waveforms, configures or screen images.
When the Type is selected as Wave, the menu is shown as the following table:
Function Menu
Setting
Description
Function
Save
Display the save function menu
Type
Wave
Choose the saving type as wave.
Source
CH1
CH2
Math
All
Choose the waveform to be saved.
(Choose All to save all the waveforms that
are turned on. You can save into the current
internal object address, or into USB storage as
a single file.)
Object
ON
OFF
The object Wave0 –Wave15 are listed in the
left menu, turn the M knob to choose the object
which the waveform is saved to or recall from.
Recall or close the waveform stored in the
current object address. When the show is ON,
if the current object address has been used, the
stored waveform will be shown, the address
number and relevant information will be
displayed at the top left of the screen; if the
address is empty, it will prompt "None is
saved".
Next Page
Enter next page
Close All
Close all the waveforms stored in the object
address.
File Format
BIN
TXT
CSV
For internal storage, only BIN can be selected.
For external storage, the format can be BIN,
TXT or CSV.
Save
Save the waveform of the source to the
selected address.
Storage
Internal
External
Save to internal storage or USB storage. When
External is selected, the file name is editable.
The BIN waveform file could be open by
PEAKTECH waveform analysis software (on
the supplied CD).
Prev Page
Enter previous page