Datasheet

In order to save the waveform of CH1 and CH2 into the USB storage as a BIN file, the operation

steps should be followed:

1. Turn on CH1 and CH2 channels, turn off the Math channel.

2. Push the Utility button, select Function in the right menu, select Save in the left menu. In the

right menu, select Type as Wave.

3. Saving: In the right menu, select Source as All.

4. In the right menu, press Next Page, and select File Format as BIN.

5. In the right menu, select Storage as External.

6. In the right menu, select Storage, an input keyboard used to edit the file name will pop up. The

default name is current system date and time. Turn the M knob to choose the keys; press the

M knob to input the chosen key. The length of file name is up to 25 characters. Select the

key in the keyboard to confirm.

7. Recalling: The BIN waveform file could be open by PEAKTECH waveform analysis software

(on the supplied CD).

Shortcut for Save function:

The Copy button on the bottom right of the front panel is the shortcut for Save function in the Utility

function menu. Pressing this button is equal to the Save option in the Save menu. The waveform,

configure or the display screen could be saved according to the chosen type in the Save menu.

Save the current screen image:

The screen image can only be stored in USB disk, so you should connect a USB disk with the

instrument.

1. Install the USB disk: Insert the USB disk into the "7. USB Host port" of "Figure 1-1 Front

panel". If an icon appears on the top right of the screen, the USB disk is installed

successfully. If the USB disk cannot be recognized, format the USB disk according to the

methods in "USB disk Requirements" on P33.

2. After the USB disk is installed, push the Utility button, select Function in the right menu,

select Save in the left menu. In the right menu, select Type as Image.

3. Select Save in the right menu, an input keyboard used to edit the file name will pop up. The

default name is current system date and time. Turn the M knob to choose the keys; press the

M knob to input the chosen key. The length of file name is up to 25 characters. Select the

key in the keyboard to confirm.

USB disk Requirements

Support USB disk format: USB 2.0 or below, FAT16 or FAT32, allocation unit size no exceed 4k,

max capacity 64G. If the USB disk doesn't work properly, format your USB disk and then try again.

There are two methods in format the USB disk, first by using computer system to format, the other

one is through formatting software to format. (8G or above USB disk can only use the second

method to format, that is through formatting software to format.)

Use system-provided function to format the USB disk