Datasheet

3
Example 1: Measurement a Simple Signal .............................................................................. 49
Example 2: Gain of a Amplifier in a Metering Circuit ............................................................. 50
Example 3: Capturing a Single Signal ..................................................................................... 51
Example 4: Analyze the Details of a Signal ............................................................................ 52
Example 5: Application of X-Y Function ................................................................................. 53
Example 6: Video Signal Trigger .............................................................................................. 55
7. Troubleshooting ......................................................................................................... 56
8. Technical Specifications ............................................................................................ 57
General Technical Specifications ............................................................................................ 60
9. Appendix ..................................................................................................................... 60
Appendix A: Enclosure ............................................................................................................. 60
Appendix B: General Care and Cleaning ................................................................................ 60
1. Safety Precautions
This product complies with the requirements of the following European Community Directives:
2014/30/EU (Electromagnetic Compatibility) and 2014/35/EU (Low Voltage) as amended by
2004/22/EG (CE-Marking). Overvoltage category II; pollution degree 2.
To ensure safe operation of the equipment and eliminate the danger of serious injury due to
short-circuits (arcing), the following safety precautions must be observed. Damages resulting from
failure to observe these safety precautions are exempt from any legal claims whatever.
* Do not use this instrument for high-energy industrial installation measurement.
* Do not place the equipment on damp or wet surfaces.
* Do not exceed the maximum permissible input ratings (danger of serious injury and/or
destruction of the equipment).
* The meter is designed to withstand the stated max voltages. If it is not possible to exclude
without that impulses, transients, disturbance or for other reasons, these voltages are exceeded
a suitable presale (10:1) must be used.
* Disconnect test leads or probe from the measuring circuit before switching modes or functions.
* Check test leads and probes for faulty insulation or bare wires before connection to the
equipment.
* To avoid electric shock, do not operate this product in wet or damp conditions.
* Conduct measuring works only in dry clothing and rubber shoes, i. e. on isolating mats.
* Never touch the tips of the test leads or probe.
* Comply with the warning labels and other info on the equipment.
* The measurement instrument is not to be to operated unattended.
* Do not subject the equipment to direct sunlight or extreme temperatures, humidity or dampness.
* Do not subject the equipment to shocks or strong vibrations.
* Do not operate the equipment near strong magnetic fields (motors, transformers etc.).
* Keep hot soldering irons or guns away from the equipment.