User Manual

3. Ports Introduction (P 1280 / 1285)

Figure 0-1 Ports of the Oscilloscope (take P 1285 for instance)

1. RS-232C Port (optional)

2. USB port: Supply power by PC USB or the adapter; communicate with PC

3. LAN port (optional): Network port which can be used to connect with PC

4. Probe Compensation: Measurement signal (3.3/1KHz) output

5. MULTI input, trigger output or Pass/Fail output and EXT trigger input

6. Signal input of Channel 2

7. Signal input of Channel 1

Note: (only P 1280/1285) If you use LAN port to communicate with PC, the oscilloscope must be

-56-