User Manual

2. Safety Terms and Symbols
Terms in this manual. The following terms may appear in this manual:
Warning. A warning statement indicates the conditions and actions which may endanger the
life safety.
Note. A note statement indicates the conditions and actions which may cause damage to
this product or other property.
Terms on the product. The following terms may appear on this product:
Danger: It indicates that there may be an immediate injury to you when you
encounter this mark.
Warning: It indicates that there may not be an immediate injury to you when you
encounter this mark.
Note: It indicates that there may be damage to this product or other property.
Symbols on the product. The following symbol may appear on the products:
High Voltage
Please Consult the
Manual
Protective Ground
End
Earth End on the
Shell
Grounding End for
Measurement
To avoid body damage and prevent product and connected equipment dam. This product can only be
used in the specified applications. Carefully read the following safety information before using the test
tool.
To avoid body damage and prevent product and connected equipment damage, carefully read the
following safety information before using the test tool. This product can only be used in the specified
applications.
Warning:
To avoid fire or electrical shock, please use proper power adapter. Use only the power adapter
appointed by the manufacturer and subject to approval of being used in the user's country.
Warning:
The two channels of the oscilloscope are non-isolated electrically. The channels should adopt
common basis during measuring. To prevent short circuits, the 2 probe ground must not be
connected to 2 different non-isolated DC level.
Warning:
The channels should adopt common basis during measuring. To prevent short circuits, the 2
probe ground must not be connected to 2 different non-isolated DC level.
The diagram of the oscilloscope ground wire connection:
-54-