User Manual

(4) Click “Connect”
22. Technical Specifications
Unless otherwise specified, the technical specifications applied are for this oscilloscope only, and
Probes attenuation set as 10X. Only if the oscilloscope fulfills the following two conditions at first,
these specification standards can be reached.
This instrument should run for at least 30 minutes continuously under the specified operating
temperature.
If change of the operating temperature is up to or exceeds 5°C, do the "SelfCal" procedure in Utility
menu (see Self Cal).
Performance Characteristics
Instruction
Bandbreite
P 1280
60 MHz
P 1285
100 MHz
P 1290
25 MHz
Channel
2 + 1 (* External)
Acquisition
Mode
Normal, Peak detect, Averaging
Sample rate
(real time)
P 1280
Dual CH
250 MSa/s
Single CH
500 MSa/s
P 1285
Dual CH
500 MSa/s
Single CH
1 GSa/s
P 1290
Dual CH
100 MSa/s
Single CH
100 MSa/s
-99-