User Manual

Example 4: Analyze the Details of a Signal
Observe the Signal Containing Noises
If the signal is interfered by the noise, the noise may cause a failure in the circuit. For the analyzing of the
noise in detail, please operate the instrument according to the following steps:
1. Press the ACQUIRE button to display the ACQU MODE menu.
2. Press the F2 menu selection button and choose Peak Detect.
In this case, the screen display contains the wave form of a random noise. Especially when the time base is
set as Low Speed, then noise peak and burr contained in the signal can be observed with the peak detection
(See Fig. 108).
Fig. 108 Wave Form of the Signal Containing Noises
-220-