User Manual

34. How to Save and Recall a Wave Form
Press the SAVE/RCL button, you can save and call out the waveforms in the instrument. The menu displayed
in the screen is shown as Fig.59.
Fig. 59 Wave Form Save Menu
The description of the Wave Form Save Menu is shown as the following table:
Function Menu
Setting
Description
Source
CH1
CH2
MATH
Choose the wave form to be saved.
WAVE
A , B
C , D
Choose the address in or from which the waveform
is saved or can be get access to.
Save
Save the wave form of the source in the selected
address.
CH (X)
X=A,B,C oder D
OFF
ON
Switch on or off the display of the stored waveform.
The PeakTech
®
1190 / 1230 oscilloscopes can store four waveforms, which can be displayed with the current
waveform at the same time. The stored waveform called out cannot be adjusted.
In order to save the waveform of the channel CH1 into the address A, the operation steps should be followed:
1. Press the F1 menu selection button and choose CH1 for Source.
2. Press the F2 menu selection button and choose A as save address.
3. Press the F3 menu selection button and save the waveform.
Press the F4 menu selection button and choose ON for CH A. The stored wave form A will be displayed in the
screen.
-173-