User Manual

Then press “F” and start to sampling data. Display show as fig. 18 when sampling finished.
Fig. 18
20. How to Set the Vertical System
The VERTICAL CONTROLS includes three menu buttons such as CH1 MENU, CH2 MENU and MATH
MENU, and four knobs such as VERTICAL POSITION, VOLTS/DIV (one group for each of the two channels).
Setting of CH1 and CH2
Every channel has an independent vertical menu and each item is set respectively based on the channel.
With the “CH1 MENU” or “CH2 MENU” menu button pushed down, the system shows the operation menu of
the corresponding channel (see Fig. 19).
Fig. 19 Channel Setting Menu
-139-