User Manual

2. Press the MENU or MENU key to select the WAVE SAVE. Four items selectable are displayed at
the bottom of the screen.
3. Press the F1 key to select the address A.
4. Press the F2 key to save the waveform in address A.
To display the saved waveform on the screen, do the following:
5. Press the F3 key to select ON and the waveform saved in address A will be displayed on the screen in
green color.
The display color is green, and the zero point of waveform , voltage and time is purple.
Now, you can see a screen that looks like the following figure 43.
figure 43: Waveform Saving
7.8 Function Setting Menu
The function setting menu is described in the following list.
Function menu Setting Description
Recall Factory Resume the instrument to its factory settings.
Auto Cailibration Perform the Auto-calibration procedure.
Language
Chinese
English
Spanish
German
Polish
Russian
Select the display language of the operation system.
Self-correcting:
The self-correcting program can improve the accuracy of the oscilloscope under the ambient temperature to
the maximum. If the ambient temperature variation is equal to or larger than 5 Celsius degrees, the
self-correcting program should be performed to gain the maximum accuracy.
-92-