User Manual

figure 21: Capacitance Measurement
6.4.5 Making a DC Voltage Measurement
To measure a DC voltage, do the following:
1. Press the V key and DCV appears at the top of the screen.
2. Insert the black lead into the COM banana jack input and the red lead into the V/Ω
ΩΩ
Ω banana jack input.
3. Connect the red and black leads to the measured point and the measured point voltage value is
displayed on the screen.
Now, you can see a screen that looks like the following figure 22.
figure 22: DC Voltage Measurement
-75-